Alma Bolt Company & Prime Fasteners 1-800-526-2200

Home | Size / Thread Reference
Hex Head Cap | Hex Tap | Heavy Hex Head | Square Head | Carriage | Elevator | Step | T-Slot | Flanged | Counterbore | L-Anchor | Scraper Blade | Head Plow
Machine | Self-Tapping | Thread Cutting | Self-Drilling | Drywall & Framing | Construction | Wood Application | Security | Plastic Accessories
Cotter | Hair | Safety | Clevis | Taper | Dowel | Pull Dowel | Coiled Spring | Spring Roll | Lynch | Snapper | Hitch | Lanyards
Flat | Square Bevel | Star | Belleville | Lock | Bonded Sealing | Neoprene | Countersunk Finishing | Fender | Dock
Hex | Heavy Hex | Tee | T-Slot | Table Flanged | Acme Thread | Coupling | Castle | Square | Lock | Kep | Aluminum Binding Posts | Cold Forged Wing | Security
Wire Rope | Custom Assemblies | Super Slings | Thimbles | Clips | Swaging Sleeves | Swaging Stops | Swaging Tool
Stainless Steel | Hooks | Links | Rings | Load Binders | Cold Shuts | Double Clevis | Screw Pin Anchor | Chain Sling | Nylon Straps | Polyester RoundslingsT
Turnbuckles | Eye Bolts | U-Bolts | J-Bolts | S-Hooks | Adjustable Clevis Yokes | Steel Clevises
Hex Keys | Ball Drivers | Taps | Drills | Dies | Clamps | Electric Terminals | Nylon Wire Ties | Woodruff Keys | Key Stock Bars | Retaining Rings | Grease Fittings
Allenuts® | Head Cap Screws | Flat Head Cap Screws | Button Head Cap Screws | Set Screws | Hex Pressure Plugs | Shoulder Screws
Powdered Actuated Tools | Powder Actuated Pins | Mechanical Anchors | Adhesive Anchors | Masonry Drills | Core Bits | Powder Actuated Loads

Hammer Drive Pins

Hammer Drive Pins

This is an example of a Mechanical Anchor. We carry a variety of conventional drilling and anchoring systems, each of which is different in its method of taking the applied load and transferring it through an anchor to the base material. Each type is designed for a specific application. Among these types are Cast-In-Place, Drilled In, Friction, Clamping, Compression, Undercut and Bonded Anchors.

The Hammer Drive Pin is an all-purpose nail drive fastener for use in the direct fastening of lightweight fixtures to concrete, block, or brick.. Stocked in 1/4" diameter and lengths from 1/2" to 3".

Group codes Represented: DRIVEP
Part# Example: 50298R

Drive Pins
H x L
Pin Diameter
Minimum Embedment
Head Diameter x Overall Length
1/4 x 1/2
1/7
3/8
1/4 x 3/4
5/8
1/4 x 1
1/4 x 1 1/4
1/4 x 1 1/2
1/4 x 2
1/4 x 2 1/2
1/4 x 3

 

About Us | Contact Us | ©2006 ABC Fastener Group, Inc.